Kirk Sullens Blacksmithing — Hands-On & Workshops in Orlando

Entry No. 42 — the Orlando file — filed under: blacksmithing

Kirk Sullens Blacksmithing

An authentic open-air forge near Mount Dora dedicated to fundamental blacksmithing and traditional bladesmithing. To maintain personal instruction, classes are strictly limited to two students at a time.

→ Three at a time, never the same twice — explore weird Orlando

The story

Kirk Sullens spent decades hammering iron into life-sized wildlife sculptures that you've likely walked past if you've ever stepped inside a Bass Pro Shops flagship anywhere in North America. But instead of scaling up into an industrial fabrication warehouse, he keeps his primary operation remarkably grounded: an unvarnished, open-air forge tucked away in the Lake County scrub outside Mount Dora. There are no assembly-line demonstrations or tourist bleachers here. If you're on the property, it's because you came to swing a hammer.

The setup rejects modern compromises. Sullens caps his beginner classes at just two students at a time, meaning there is nowhere to hide if your strike angle wanders or you lose your fire rhythm. Depending on the session, you're either shoveling coal into an old-school hearth to forge a dedicated hearth tool or running carbon steel through a roaring propane furnace to beat out a functional, single-piece blacksmith's knife. Sullens steps in with thirty years of muscle memory to correct the micro-flaws in your swing that you didn't even realize you were making.

What it's like

An uninsulated, open-air workshop where Florida humidity meets a two-thousand-degree fire. You will get covered in soot, your forearms will burn, and you'll spend hours learning the hard physics of drawing a taper, beveling edges, and managing heat treating. Do not wear synthetic clothes unless you want molten flecks burning nylon into your skin—stick to heavy cotton denim and sturdy leather boots. Note that the Highway 441 address on file is strictly a commercial mailing drop; Kirk emails the actual rural workshop coordinates directly once your private or semi-private date is locked in.

The move: Suit up in heavy leather aprons, shovel coal into the forge, and take turns wielding cross-peen hammers at the anvil to draw a taper, grind bevels, and heat-treat a functional carbon-steel blacksmith knife from scratch.

Where: 18848 Hwy 441 #184, Mount Dora, FL 32757 (mailing address)

Hours: Added 2026-11-07 — confirm current hours before you go.

⚠ Seasonal or scheduled — always check before you go.

#blacksmithing #bladesmithing #forge #knife-making #metalwork

Pair it with

  • Rock Springs Run at Kelly Park — After spending the morning breathing coal dust and sweating over an anvil, submerge yourself in Kelly Park's 68-degree natural limestone spring to reset your nervous system.
  • The Stillroom — Trade flying sparks and heavy iron for this quiet second-floor herbal apothecary in Winter Garden, where you can source botanical salves for your bruised forearm tendons.
  • Central Florida Railroad Museum — Follow up hand-forging your own metal tool by visiting this 1913 Tavares & Gulf depot to examine the vintage industrial track-laying gear and forged rail artifacts.

More weird in Orlando

Good to know

How many people are allowed in a class?

Kirk caps beginner and bladesmithing classes at two students per session (with one-on-one private lessons also available) to keep instruction hands-on and direct at the anvil.

What do you actually make during the workshop?

In the Introduction to Blacksmithing class, you work a coal forge to learn fundamental tapering and bending while building a functional iron fire tool. In Basic Bladesmithing, you use a propane forge to shape, grind, and heat-treat a carbon-steel blacksmith's knife (final tempering and honing are completed at home).

Where is the forge physically located?

The listed address on Highway 441 in Mount Dora is solely a mailing drop. The actual open-air forge is on private property just outside Mount Dora, and Kirk provides exact driving directions after you book.

What should I wear and bring?

Wear natural fibers only (all-cotton denim and heavy shirts) and closed-toe leather boots to protect against sparks. Pack plenty of water, electrolytes, and a lunch, as the forge gets intensely hot and nearby food runs eat into shop time.

Plan a visit & invite your people →

Further reading: Official site · workingtheflame.com · iron-osprey-designs.com · crookedpathforge.org

last checked: 2026-11-07